
Tous les appareils sont connectés sans fil
QCA IPQ4019 WiFi 5 ac Plafond AP

Plafond AP 802.11ac WiFi 5 Haute Puissance QCA IPQ4019 AP plafond
Basé sur la technologie 802.11 ac WiFi 5.
Double bande 400 Mbps (2,4 GHz) + MU-MIMO 1800 (900 + 900) Mbps 5 GHz a/n/c 80MHz+80MHz
IEEE 802.3at PoE pris en charge.
Vitesse Gigabit 2 ports LAN RJ45 10/100/1000 Mbps.
Compatible avec IEEE 802.11ac/b/g/n.
Prend en charge la diffusion SSID, Multi SSID jusqu'à 12.
Supporte la balise VLAN basée sur le SSID pour protéger l'ensemble de la sécurité des données.
Prise en charge de la passerelle (PPPOE, IP statique, IP dynamique), AP sans fil, répéteur, mode de fonctionnement WISP.
Avec fonction de pare-feu, filtre IP, filtre URL et filtre MAC.
Conforme à IEEE 802.3at la norme.
Prend en charge l'analyseur sans fil afin d'ajuster la puissance et la fréquence RF.
Prise en charge du DDNS, du passage VPN, du transfert de port et de l'hôte DMZ.
Specifications:
Hardware:
Chipset Qualcomm IPQ6000+QCA8075+QCN5052+QCN5022
Standard 802.11ax/ac/b/g/n, MIMO technology
DDR DDR3 256 or 512MB
Flash NOR-8MB + NAND-128MB
2.4G Frequency 2.4GHz - 2.484GHz
2.4G Wi-Fi standard 802.11b/g/n/ax
5.8G Frequency 5150-5850MHz
5.8G Wi-Fi Standard 802.11 a/n/ac/ax
Interface
1 * 10/100 /1000 Mbps RJ45 WAN Port
1 * 10/100 / 1000 Mbps RJ45 LAN Port
1 * Reset button, press 10 seconds to revert to default setting
1 * 10/100/1000Mbps SFP port
1 * MIMI PCIE Slot for LTE
Antenna
IPEX Connector, 4*4dBi dual band omni antennas
Data Rate 1800Mbps ( 2.4G: 573Mbps (11ax 2x2); 5.8G: 1201 Mbps (11ax 2x2)
End Users 300+
RF Power 27dBm
PoE 48V (IEEE 802.3at)
LED light WAN port light, LAN port light, system light
Surge Different Mode: ±2KV, Common Mode: ±4KV
ESD ±4KV
Max Power Consumption ≤ 20W
Size 245 mm * 200 mm * 90 mm
Working Temperature -30°C to 70°
Storage Temperature -40°C to 75°C
Humidity 5%~95% (non-condensing
Weight Net weight: 3500g
Enclosure IP67
Firmware Features:
Operation mode Wireless AP: Plug and Play.
Gateway: Dynamic IP/Static IP/PPPoE
Wi-Fi Repeater: Bridge exist wireless signal, then extend to more range.
WISP: For WLAN ISP, bridge ISP’s exist wireless signal, then dial-up to obtain Ethernet and extend more wireless range.
Wireless Functions Multiple SSID functions: 2.4GHz: 4; 5.8GHz: 4
Support SSID hidden
Support seamless roaming, 802.11kvr standard.
Support 5G Prior for a faster Ethernet.
Wireless Security: Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, 802.1x
Support MAC filter
Support Wi-Fi time on/off to save energy
Support client isolation to improve the wireless stability
Support RF power adjustable, adjust the RF power based on environment.
Support user quantity limited, Max 64 users to access each band.
Support mesh networking
Networking Function
VLAN settings
Cloud access support in gateway mode
Device Management
Back-up the configuration
Restore the configuration
Reset to factory default
Reboot the device: including time reboot or reboot immediately
Admin management password modify
Firmware upgrade
System log
Support firmware GUI web management, AC controller management, remote management, and cloud management
Protocols IPv4